Factory Direct 1.2738 3Cr2MnNiMo Plastic Mould Tool Steel Round Bar

• Customization: Available
• After-sales Service: Yes
• Warranty: 3 Years
• Model NO.: 1.2738 3Cr2MnNiMo
• Type: Alloy Steel Bar
• Standard: AISI, ASTM, GB, JIS, DIN, BS
• Technique: Forged
• Application: Structural Steel Bar, Tool Steel Bar, Die Steel Bar
• Surface Treatment: Black; Peeled; Polished; Machined; Grinded; Turned
• Alloy: Alloy
• Special Use: Mold Steel, Free Cutting Steel, Cold Heading Steel
• Certification: RoHS, CE, ISO
• Transport Package: Bulk Package
• Specification: ISO 9001-2000
• Trademark: Qilu
• Origin: China
• HS Code: 722840
• Production Capacity: 500, 000ton/Year

Product Description

Factory Direct 1.2738 3Cr2MnNiMo Hot Rolled Plastic Mould Tool Steel Round Bar

 

1: DIN 1.2738 steel introduction
    DIN 1.2738 is specially used for Plastic injection die moulds. The characteristics of a material are right sharpening, photo-etching properties with high purity and good homogeneity. DIN 1.2738 is upgraded version of plastic mold steel 0f 1.2311, which normally supply in Pre hardened condition. Hardness in as supplied condition 280-320 HB with having uniform hardness. The additional nickel content of 1 % increases through hardening. It has good machinability, suitable for Texturing, fine polishability, adequate corrosion resistance, vacuum-degassed steel.

2: DIN 1.2738 Steel equivalent
 

Country	China	Japan	Germany	USA	UK
Standard	GB/T 1299	JIS G4404	DIN EN ISO4957	ASTM A681	BS 4659
Grade	3Cr2MnNiMo	/	1.2738	P20+Ni / 718	/

3: DIN 1.2738 steel chemical composition

Grade	C		Mn		Si		Cr		Ni		Mo
1.2738	0.40		1.50		0.30		1.90		1.10		0.20
3Cr2MnNiMo	0.33	0.37	0.8	1.1	0.15	0.35	1.65	1.75	0.4	0.5	0.4	0.5
P20+Ni / 718	0.35	0.45	1.3	1.6	0.2	0.4	1.8	2.1	1.9	1.2	0.15	1.35

4: DIN 1.2738 steel mechanical properties
    The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
  
5: DIN 1.2738 steel overviews

Size	Round	Dia 6-1200mm
	Plate/Flat/Block	Thickness 6mm-500mm
		Width 20mm-1000mm
Process	EAF+LF+VD+Forged+Heat treatment(optional)
Heat treatment	Normalized ; Annealed ; Quenched ; Tempered
Surface condition	Black; Peeled; Polished; Machined; Grinded; Turned; Milled
Delivery condition	Forged; Hot rolled; Cold drawn
Test	Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc.
Payment terms	T/T;L/C;/Money gram/ Paypal
Trade terms	FOB; CIF; C&F; etc..
Delivery time	30-45 days
Application	DIN 1.2738 is applicable for large & small plastic mould dies for Automotive Industries, Dies for Domestic goods , High finishing plastic Die, Boaster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Upsetter Blocker, forging dies, Different dies & mold for plastic products etc.

 

6.HEAT TREATMENT:

    Already pre-toughened; usually no heat treatment required

Soft annealing: 
    710 to 740 °C for about 2 to 5 hours; slow controlled cooling of 10 to 20 °C per hour to about 600 °C further cooling in air, max. 220 HB

Hardening: 
    840 to 870 °C 
    15 to 30 minutes keeping curing temperature 
    quenching in oil/hot bath/air 180 bis 220 °C 
    obtainable hardness: 53 HRC

Tempering: 
    slow heating to tempering temperature immediately after hardening; minimum time in furnace: 1 hour per 20 mm part thickness; tempering twice is recommended.

7: Delivery condition
    For hot forged or hot rolled bar, usually the delivery condition is hot forged or rolled, annealed, rough turned.
    For hot forged plate, usually the delivery condition is hot forged, annealed, milled surface.
    For hot rolled plate, usually the delivery condition is hot rolled, annealed, black surface

Hunan Qilu Industrial Co., Ltd has the capacity to forge round steel, steel flat, square steel, module, shaft and roller, etc. The main specifications of the products include Φ80-1000mm forging materials and 80-1200mm square billets and which the maximum piece weight can reach 50T.



Hunan Qilu Industrial Co., Ltd were already engaged in exporting steel for 11 years, could supply a great variety of hot forged, hot rolled and cold drawn Steels,  including engineering steel, cold work tool steel, hot work tool steel, plastic mold steel, spring steel, high speed steel, stainless steel etc., besides Qilu Industrial also has their own heating treatment shop and machining shop to provide heating and cutting service.

Since 2008 year, Hunan Qilu Industrial has the right to export all FORGED STEEL behalf of Qilu Speical Steel Co.,ltd which is specialized in smelting and forging of special steel since 1965 year, now Qilu special steel is one of the biggest manufacturer of forged product in China.The forged products are used in Automotive, Aerospace, Power Generation, Oil & Gas, Transportation and Industrial. We already set up the warehouse in Wuxi and Dongguan city, more than 20000 tons ex-stock could be supplied with kinds of size.

Qilu Industrial is the professional one-stop steel manufacturer, stockist and exporter in China, our customers spread all over the world, include West Europe, North America, South America, Asia, Middle Asia, Africa, Australia, etc.



The company owns advanced special steel smelting facilities and forging processing equipments, the main steel-making equipment include 2 sets of 50t ultra-high power electric arc furnaces,2 sets of 60t LF refining furnaces,1 set of 60t vacuum degassing refining furnace and 4 sets of 1-20t electroslag re-melting furnaces.
The main forging equipments mainly include:3 sets of 5t electro-hydraulic hammers, 1 set of high-speed forging units of 800t,1600t,2000t and 4500t respectively.




Hunan Qilu Industrial CO., LTD
Web: qilusteel.en.made-in-china.com