Forging Carbon Steel 1035 C35 S35c Forged Round Bars

• Customization: Available
• After-sales Service: Yes
• Warranty: Three Years
• Model NO.: 1035
• Type: Carbon Steel Bar
• Standard: AISI, ASTM, GB, JIS, DIN, BS
• Technique: Forged
• Application: Structural Steel Bar, Tool Steel Bar, Die Steel Bar
• Surface Treatment: Black; Peeled; Polished; Machined; Grinded; Turned
• Alloy: Non-alloy
• Special Use: Mold Steel, Free Cutting Steel, Cold Heading Steel, Engineering Steel
• Heat Treatment: Annealed/Normalized/Q+T
• Payment Term: 30% Tt Deposit, Balance Against Bl Copy
• Length: 3000-5800mm, or as Per Request
• Ex-Stock: Yes
• Delivery Date: 30 Days
• Ut Standard: Sep 1921-84 D/D
• Grain Size: ASTM E112
• Non-Metallic Inclusiton: ASTM E45
• Shape: Round/Flat/Block/Square/Tube
• Certificate: ISO, ABS, BV, CCS, Dnv, Lr, Gl, Mill Certificate
• Process: Eaf+Lf+Vd+Forged+Heat Treatment(Optional)
• Delivery Condition: Hot Rolled/Forged/Cold Drawn
• Quality Inspection: Ut, Chemical Composition, Physical Properties/SGS
• Usage: Automotive, Aerospace, Power Generation, Oil & Gas
• Experience: 15 Years Manufacturer Experience
• Transport Package: Seaworthy Package
• Specification: DIA 6-1200
• Trademark: Qilu
• Origin: China
• HS Code: 722840
• Production Capacity: 500, 000tons/Year

Product Description

Product Description

Forging Carbon Steel 1035 C35 S35C Forged Round Bars

1: 1035 Steel Introduction
    AISI 1035 is a low-cost, tough, medium-strength steel ideal for general-purpose applications, AISI 1035 is a medium-carbon alloy that can be normalized, hot-rolled, and water- or oil-quenched before tempering. 
    1035 steel has a chloride threshold value the critical chloride concentration above which the steel will begin to corrode four to five times higher than that of carbon steel. 1035 (HR) - Intermediate carbon higher in strength and hardness than low carbon steel. Used for studs, bolts etc. Water-hardening steels suitable for small parts of moderate strength. Used in levers, bolts, nuts, studs, and similar parts which are headed, upset, or extruded. 
    One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good Corrosion resistance, high harness, toughness and strength.
 
2: 1035 Steel Equivalent

Country	China	Japan	Germany	USA	UK
Standard	GB/T 699	JIS G4051	DIN (W-Nr.) EN 10083-2	AISI/ASTM ASTM A20	EN / BS
Grade	/	S35C	C35	1035	/

3: 1035 Steel Chemical Composition

Grade	C	Si	Mn	P	S	Ni	Cr	Cu
S35C	0.32 - 0.38	0.15 - 0.35	0.6 - 0.9	0.03 max	0.035 max	0.2 max	0.2 max	0.3 max
C35	0.32 - 0.39	0.10-0.40	0.5 - 0.8	0.045 max	0.045 max	/	0.4 max	/
1035	0.32 - 0.38	/	0.60 - 0.90	0.04 max	0.05 max	/	/	/

 
4: 1035 Steel Mechanical Properties  

    The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
 

5: 1035 Steel Overviews

Size	Round	Dia 6-1200mm
	Plate/Flat/Block	Thickness 6mm-500mm
		Width 20mm-1000mm
Heat treatment	Normalized ; Annealed ; Quenched ; Tempered
Surface condition	Black; Peeled; Polished; Machined; Grinded; Turned; Milled
Delivery condition	Forged; Hot rolled; Cold drawn
Test	Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc.
Payment terms	T/T;L/C;/Money gram/ Paypal
Trade terms	FOB; CIF; C&F; etc..
Delivery time	30-45 days
Application	1035 are used for Tools, Bulldozer edges, Drawing, Cold extrusion, Chain pins, Sealing rings, Track links, Nails, Couplings, Levers, Studs, Trusses, Gears, Bolts, Rods, Pins, Shafts, Axles.

 

6.1035 Steel Heat Treatment
Annealing
    Full annealing of small C1035 forgings is carried out from 1550-1625oF (840-890oC) followed by furnace cooling at 50oF (28oC) per hour, to 1200oF (650oC) soaking and air cooling.
Normalizing
    The normalizing temperature range for this grade is typically 1600-1650oF (870-900oC.)
    Normalizing is followed by cooling in still air. When forgings are normalized before hardening and tempering or other heat treatment, the upper range of the normalizing temperature is used. When normalizing is the final treatment, the lower temperature range is used.
Hardening
    Hardening of this grade is carried out from an austenitizing temperature of 1525-1575oF (830-860oC) and oil or water quenching.
Flame and induction hardening may be carried out by heating quickly to the desired case depth and quenching in water or oil. This should be followed by a tempering treatment at 300-400oF (150-200oC) to reduce stresses in the case without affecting its hardness. A surface hardness of Rc 50 may be obtained by this treatment.
Tempering
    Tempering after normal hardening and oil or water quenching is carried out at 750-1260 oF (400-680oC) to give the required mechanical properties as determined by practical experience.
 

7: Delivery Condition
    For hot forged bar, usually the delivery condition is hot forged, annealed/QT rough turned/Black surface.
    For hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
    For hot forged plate, usually the delivery condition is hot forged, annealed/QT, milled surface
    For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.




Hunan Qilu Industrial Co., Ltd has the capacity to forge round steel, steel flat, square steel, module, shaft and roller, etc. The main specifications of the products include Φ80-1000mm forging materials and 80-1200mm square billets and which the maximum piece weight can reach 50T.






Hunan Qilu Industrial Co., Ltd were already engaged in exporting steel for 11 years, could supply a great variety of hot forged, hot rolled and cold drawn Steels,  including engineering steel, cold work tool steel, hot work tool steel, plastic mold steel, spring steel, high speed steel, stainless steel etc., besides Qilu Industrial also has their own heating treatment shop and machining shop to provide heating and cutting service.

Since 2008 year, Hunan Qilu Industrial has the right to export all FORGED STEEL behalf of Qilu Speical Steel Co.,ltd which is specialized in smelting and forging of special steel since 1965 year, now Qilu special steel is one of the biggest manufacturer of forged product in China.The forged products are used in Automotive, Aerospace, Power Generation, Oil & Gas, Transportation and Industrial. We already set up the warehouse in Wuxi and Dongguan city, more than 20000 tons ex-stock could be supplied with kinds of size.

Qilu Industrial is the professional one-stop steel manufacturer, stockist and exporter in China, our customers spread all over the world, include West Europe, North America, South America, Asia, Middle Asia, Africa, Australia, etc.




The company owns advanced special steel smelting facilities and forging processing equipments, the main steel-making equipment include 2 sets of 50t ultra-high power electric arc furnaces,2 sets of 60t LF refining furnaces,1 set of 60t vacuum degassing refining furnace and 4 sets of 1-20t electroslag re-melting furnaces.
The main forging equipments mainly include:3 sets of 5t electro-hydraulic hammers, 1 set of high-speed forging units of 800t,1600t,2000t and 4500t respectively.






Hunan Qilu Industrial CO., LTD
Web: qilusteel.en.made-in-china.com